-+ 0.00%
-+ 0.00%
-+ 0.00%
Everbright Securities: The future of lightweight materials can be expected in the AI era of robotics and material resonance physics
Share
Listen to the news

The Zhitong Finance App learned that Everbright Securities released a research report saying that demand for lightweight humanoid robots is increasing, driving the simultaneous expansion of various new chemical materials such as ultra-high molecular weight polyethylene and PPA. In addition to carbon fiber and PEEK, ultra-high molecular weight polyethylene is a core material for dexterous hand tendon rope and joint transmission due to its high strength, lightweight, wear-resistant and self-lubricating characteristics. Yunzhongma is participating in the upstream high-end production capacity of Zhongxi New Material Card. The application prospects of materials such as PPA (high temperature nylon) in core components such as robot joints, gear bearings, and connectors are also broad. Take Jinjin Technology (600143.SH), a leading domestic special engineering plastics leader, as an example. The company has set up a special robot materials research and development team to actively develop and cooperate with leading companies in the robotics field. It has successively launched a series of products such as ultra-high strength, fatigue and wear resistant PPA, which significantly enhances the motion performance and stable and long-lasting performance of key components in the field of physical intelligence.

The main views of Everbright Securities are as follows:

Physical AI has been implemented, humanoid robots have been mass-produced, and lightweight materials have ushered in definitive incremental space. Physical AI drives artificial intelligence from digital simulation to physical world interaction, and embodied intelligence is its core landform; humanoid robots, as the core carrier of embodied intelligence, are moving from the laboratory demonstration stage to large-scale industrial deployment. Compared with traditional industrial robots, humanoid robots that operate in complex scenarios put forward more stringent performance requirements for lightweight, high flexibility, fatigue resistance, and high response sensitivity of structural parts, directly reshaping the demand logic for lightweight materials in upstream chemicals. According to the forecast of the Ministry of Industry and Information Technology, China's total production of humanoid robots is expected to exceed 100,000 units in 2026. The data for the first half of the year further confirms this trend — China's four-legged robots already account for nearly 70% of global sales, and there are more than 400 models of humanoid robot products, more than half of the world. Currently, the humanoid robot industry is crossing the critical threshold from the laboratory to the factory: global sales volume jumped to more than 13,000 units in 2024, and the growth momentum is beginning to show; looking at a longer cycle, Omdia predicts that global sales will reach 605,700 units in 2030, and it is expected to rise to 2.6 million units in 2035.

Carbon fiber is suited to the immediate needs of lightweighting, and demand for robot emissions is rising. The core value of carbon fiber in the field of humanoid robot applications is to build a lightweight, high-strength “skeletal system” to solve core problems such as short battery life, clumsy movement, and poor durability, and provide a material base for large-scale implementation. High-performance carbon fiber is used to build the fuselage skeleton and core structural parts, which can greatly reduce the machine's self-weight while effectively avoiding deformation failure problems under dynamic operation; its good corrosion resistance and environmental adaptability can also ensure that the robot maintains stable performance under multiple operating conditions. Currently, domestic T300 and T700 grade carbon fibers have been applied on a large scale. The T800 grade is steadily advancing mass production, and the T700 to T800 grade can meet most structural parts requirements for humanoid robots. However, the self-sufficiency rate for high-end products of grade T1000 and above is less than 10%. At the same time, there is still a gap with overseas leaders in terms of pre-impregnation design, composite molding process, and cost control, which limits the further penetration of domestic carbon fiber in the robotics field. As humanoid robots gradually become large-scale, the proportion of high-end carbon fiber applications will continue to increase, and process optimization and technology upgrades are expected to accelerate the opening up of incremental space for domestic substitution.

PEEK's performance advantages are outstanding, leading the robot lightweight circuit. The Advanced Robotics Industry Research Institute (GGI) expects the global humanoid robot market to be about US$1,017 billion in 24, reach US$15 billion by 30, and the CAGR will exceed 56% in 24-30. Weight reduction is one of the best solutions to achieve the load, battery life, and flexibility of humanoid robots. PEEK materials have high rigidity and high toughness, and also have excellent properties such as heat resistance, corrosion resistance, and wear resistance. In addition, as a thermoplastic material, PEEK material can also be easily processed into parts of various shapes and used in various special parts or special working conditions. At the same time, the density of pure PEEK resin is only about 1.3 g/cm3, which is even lower than the density of carbon fiber materials, and is also an excellent lightweight material. In summary, PEEK materials themselves meet the requirements of high-strength and lightweight new materials, and have high application potential in the field of humanoid robots.

Demand for lightweight humanoid robots is growing, driving the simultaneous expansion of various new chemical materials such as ultra-high molecular weight polyethylene and PPA. In addition to carbon fiber and PEEK, ultra-high molecular weight polyethylene is a core material for dexterous hand tendon rope and joint transmission due to its high strength, lightweight, wear-resistant and self-lubricating characteristics. Yunzhongma is participating in the upstream high-end production capacity of Zhongxi New Material Card. The application prospects of materials such as PPA (high temperature nylon) in core components such as robot joints, gear bearings, and connectors are also broad. Take Jinjin Technology, a leader in special engineering plastics in China, as an example. The company has set up a special robot material research and development team to actively develop and cooperate with leading companies in the robotics field. It has successively launched a series of products such as ultra-high strength, fatigue and wear resistant PPA, which significantly enhances the motion performance and stable and long-lasting performance of key components in the field of physical intelligence.

Risk warning: risk of technology substitution, risk of downstream promotion and application falling short of expectations, risk of raw material price fluctuations.

Disclaimer:Webull uses external vendor Google Translation Service for news translations where we endeavour to ensure these are correct, however, we recommend that you please double-check this information accordingly. Webull is not responsible for translation errors or issues.
What's Trending